ASI SDK

from v2.8 of ASICamerma2 SDK (2018.8.8):

the control settings are in this function

 2.9 typedef enum ASI_CONTROL_TYPE
{
ASI_GAIN = 0,//gain
ASI_EXPOSURE,//exposure time (microsecond)
ASI_GAMMA,//gamma with range 1 to 100 (nominally 50)
ASI_WB_R,//red component of white balance
ASI_WB_B,// blue component of white balance
ASI_BRIGHTNESS,//pixel value offset (a bias, not a scale factor)
ASI_BANDWIDTHOVERLOAD,//The total data transfer rate percentage
ASI_OVERCLOCK,//over clock
ASI_TEMPERATURE,// sensor temperature，10 times the actual temperature
ASI_FLIP,//image flip
ASI_AUTO_MAX_GAIN,//maximum gain when auto adjust
ASI_AUTO_MAX_EXP,//maximum exposure time when auto adjust，unit is micro seconds
ASI_AUTO_MAX_BRIGHTNESS,//target brightness when auto adjust
ASI_HARDWARE_BIN,//hardware binning of pixels
ASI_HIGH_SPEED_MODE,//high speed mode
ASI_COOLER_POWER_PERC,//cooler power percent(only cool camera)
ASI_TARGET_TEMP,//sensor's target temperature(only cool camera)，don't multiply by 10
ASI_COOLER_ON//open cooler (only cool camera)
ASI_MONO_BIN,//lead to a smaller grid at software bin mode for color camera
ASI_FAN_ON,//only cooled camera has fan
ASI_PATTERN_ADJUST.//currently only supported by 1600 mono camera
ASI_ANTI_DEW_HEATER
}ASI_CONTROL_TYPE;
Camera control type