Pharos grinder versions

 1.0 original (1 Apr 2011)

68mm conical burr (49mm inner burr), by Italmill. Used on Compak K10

Axle 1/2" x 13 TPI ( imperial) 1.95mm pitch 

Adjustment collar, Coarse thread 13 tpi pitch:

1.1 :all metric

Axle 12 x 1.0 mm(metric)

Adjustment collar, Fine thread 1mm pitch:

Molded ABS bottom funnel

2.0(2015)

Announcement 

Short axle

12 x 1.0 mm pitch

bottom brass bushing integrated to bottom collar

Dosing cup

Manufactured by Innoland, Taiwan.

May 2024

Last Pharos

1.1 to 2.0 upgrade kit

Pharos 2.0 Alignment ( should also work on v 1.0 or 1 .1)

No locktite. Burrs have to freely moving

Step 1. Back off collar 1/4 turn 1/4 of 1mm

Step 2. Turn, find tight spot and bang the top "magic ball"

Step 3 Tighten the collar by say  approx 1/20 of a turn , so gap now 0.2 mm

Turn axle, find tight spot and lightly tap the ring burr

Repeat step 3 as many times as you like.

Step 4. When satisfied tighten the burr bolts

Tighten the burr bolts. if you have torque wrench,  setting: 3 Nm

Reference 

Split shaft collar, 2