jong ken on heater wire replacement
coffeeclub99 heater mod to 1850W and repair blogs and ruten
Automation mod from N Sager (aka Brewtal)
this one from Evan Graham (aka evquink) and roasthacker:
bean mass probe bracket on thingiverse
evquink's github on bean mass probe v2
RaspberryPi mod from r0bin
about temperature readings on HB:
unconfirmed. the thermal sensor on the heater box side is the feedback probe for controlling the temp you set. The temp read ( on the LED display) is from the exit side probe. The air temp entering the roasting chamber would then be limited to the 250 deg c max.
Remember this unit is reading air temp. Not bean temperature.
The heater side sensor seems to be type k embedded in hex screw, whereas on exhaust side, seems to be type k with metal sheath
留言
張貼留言