| EV3 | NXT | |
|---|---|---|
| New play experience with apps | Yes | No |
| Connect to Apple devices | Yes | No |
| Voice control via apps | Yes | No |
| Connect your robot to Internet (via USB host) | Yes | No |
| Online building instructions – models in total | 17 | None |
| 3D building instructions (the 5 main models) | Yes | No |
| Fewer building steps, less time | Yes | No |
| Social web site for the user | Yes | Yes for adults |
| Non-verbal paper instruction | Yes | No |
| Button backlight (3 colors) | Yes | No |
| Loudspeaker | Premium | Basic |
| Motor ports | 4 | 3 |
| Memory | 16 MB | 256 KB |
| Screen resolution | 178x128 pixels | 100x64 pixels |
| USB Host port | Yes | No |
| Master/slave robot control(Bluetooth) | 1 master/7 slaves | 1 master/3 slaves |
| Infrared Sensor | Yes | No |
| Infrared Beacon | Yes | No |
| SD card reader | Yes | No |
| Linux on intelligent brick | Yes | No |
| Processor | ARM 9 | ARM 7 |
ES8388 audio codec module is one of the audio codec modules available that is supported by ESP32 and official ESP-ADF releases. The ES8388 module lets you have: Stereo microphone and line input Stereo headphone and line out Up to 96 kHz 24 bpp high quality audio This module is compatible with all MCUs that have I2C and I2S ports (like ESP32, ESP8266, STM32, i.MX6, Raspberry Pi, etc) ES8311 Maxgerhardt github PCBartist twblogs ESP32-A1S (limited stock)Audio codec AC101 or ES8388 built-in. NB the pinouts and firmware are different! Arduino - ESP31-A1S instructable Phil Schatzmann and his github Simple A2DP thaaraak github on ESP32-A1S github of Yveaux and Marcel-licence ESP ADF example: Logitech PiCorePlayer squeeze lite squeezebox forum ESP32-Audio-kit (from AI thinker) based on ESP32-A1S, is simple and small. But upgrade-ability seems limited Alex John Talbert mixer equalizer: can this be used as simple equalizer? how about proces...
留言
張貼留言